Sony MHC-F150 - Manual (Page 20)

Listening to the radio (continued)
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press the button, the
band changes as follows:
2 band model:
FM*-» AM
3 band model:
FM -► MW -* SW
t_______I
FM •
L
or
•MW- ■ LW
Turn the jog dial to tune in the
desired preset station.
For MHC-F250AV
You can also use TUNING + or - on the
remote to tune in preset stations.
For MHC-FR10 and MHC-F150
You can also use or on the
remote to tune in preset stations.
To Do this
Turn off the radio Press 1 / (!).
Adjust the volume Turn VOLUME (or press
VOLUME (VOL)-i-/-
on the remote).
To listen to non-preset radio
stations (from front panel only)
Use manual or automatic tuning in step 2.
For manual tuning, press + (► ► / ► ► !) or -
((◄ ◄ / r e p e a t e d l y . For automatic tuning,
press and hold + (► ► /► ► 1) or -
/■ <^).
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO/MONO so that "MONO^' appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Turn counter­
clockwise for
lower preset
numbers. Turn clockwise
for higher
preset
numbers.
Preset number Frequency
rr. 'U T7 -1 nl ' LI mu