To connect the floppy disk drive externally, Using the floppy disk drive – Sony PCG-705 User Manual

Page 50

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

There are two ways to connect the supplied floppy disk drive to your
computer:

□ Externally, by connecting it to the computer’s FDD/Printer

connector.

□ Internally, by inserting it into the drive bay.

The CD-ROM drive is inserted into the drive bay at the factory. If you
want to use both the CD-ROM and the floppy disk drive at the same time,
use the floppy disk drive as an external drive.

If you connect the floppy disk drive externally while your computer is on,
use the Sony Notebook Setup utility to select Floppy Disk Drive. See

“Displaying the Sony Notebook Setup Screen” on page 95 for details.

To connect the floppy disk drive externally

□ Connect the floppy disk drive to the Q / FDD/Printer connector

using the supplied external floppy disk drive cable.

Using the Floppy Disk Drive