Sony PCG-705 - Manual (Page 134)

I
On Handling
□ Clean the cabinet with a soft, dry cloth or a soft cloth lightly
moistened with a mild detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent such as alcohol or benzine,
as these may damage the finish of your computer.
Should any solid object or liquid fall into the computer, shut down
your computer and then unplug it. You may want to have the
computer checked by qualified personnel before operating it any
further.
□
□ Do not drop the computer or place heavy objects on top of the
computer.
□
□
□
□
□
□
On Installation
□ Do not place your computer in a location subject to:
□ Heat sources, such as radiators or air ducts
Direct sunlight
Excessive dust
Moisture or rain
Mechanical vibration or shock
Strong magnets or speakers that are not magnetically shielded
Ambient temperature of more than 95® F (35® C) or less than
50® F (10® C)
□ High humidity
Do not place electronic equipment near your computer. The
computer’s electromagnetic field may cause a malfunction.
Provide adequate air circulation to prevent internal heat build-up. Do
not place your computer on porous surfaces such as rugs or blankets,
or near materials such as curtains or draperies that may block its
ventilation slots. Leave a space of at least 8 inches behind the back
panel of the computer.
The computer uses high-frequency radio signals and may cause
interference to radio or TV reception. Should this occur, relocate the
computer a suitable distance away from the set.
Use only specified peripheral equipment and interface cables;
otherwise, problems may result.
Do not use cut or damaged connection cables.
126