Sony MHC-RXD3 User Manual

Mini hi-fi component system

Table of contents

Document Outline

3-866-217-11(1)
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
NOTICE FOR THE CUSTOMERS IN THE U.S.A.
CAUTION
INFORMATION
CAUTION
Note on CATV system installer:
NOTICE FOR THE CUSTOMERS IN CANADA
CAUTION:
Step 1: Hooking up the system
- I Connect the speakers.
- Note
- Jack type ®
- Jack type ®
- Note
step 2: Setting the time
- 2 Press or the hour.
- repeatedly to set
- 4 Press or repeatedly to set the minute.
- 5 Press ENTER/NEXT.
- To change the preset time
Step3: Presetting radio stations
- 1 Press TUNER/BAND repeatedly until the band you want appears in the display.
- 3 Press TUNER MEMORY.
- 4 Press ENTER/NEXT.
- 5 Repeat steps 1 to 4 to store other stations.
- To tune in a station with a weak signal
- To set another station to the exist preset number
- To erase a preset number
  - To change the AM tuning interval (for models with the AM TUNING STEP switch on the rear panel)
  - Tip
Connecting optional AV components
- Connecting an MD deck for digital recording
- Connecting an MD deck for analog recording
Connecting outdoor antennas
- FM antenna
  - Jack type ®
- AM antenna
  - Jack type ®
  - Jack type (D
Playing a CD
- 1/(1)
- (power)
- ■CD^
  - 1 Press A OPEN/CLOSE and place up to two CDs on the disc tray.
Recording a CD
- To stop recording
  - Tips
  - Note
Listening to the radio
- To listen to non-preset radio stations
  - Manual tuning
  - Tips
Recording from the radio
- 1 Press TUNER/BAND to select the band you want.
- 2 Press or repeatedly to
- tune in the desired preset station. Press for lower preset numbers.
- To stop recording
  - Tips
Playing a tape
- -II
- Tips
- Searching for the start of the current or the next track (AMS*)
- To go forward
- To go back
- Note
Recording from a tape
- To stop recording
Using the CD display
- Press DISPLAY/DEMO during playback.
- Tip
Playing the CD tracks repeatedly
- Press REPEAT during playback until "REPEAT" appears in the display.
- To cancel Repeat Play
Playing the CD tracks in random order
- To cancel Shuffle Play
- To select a desired CD
  - Tips
Programming the CD tracks
- 6 To program additional tracks, repeat steps 3 to 5.
- 7 Press CD ►'ll (or CD on the remote).
- To cancel Program Play
  - Tips
Recording on a tape manually
Recording CDs by specifying the track order
- To stop recording
- To cancel Program Edit
Adjusting the sound
- To reinforce bass (DBFB)
- To listen through the headphones
Selecting the audio emphasis
- ^ Press FILE SELECT repeatedly until the effect (ROCK, POP or DANCE) you desire appears in the display.
- To cancel the effect
- To change the spectrum analyzer display
Falling asleep to music
- -► Press SLEEP.
- When you choose "AUTO"
- To check the remaining time
- To change the time to turn off
- To cancel the Sleep Timer function
Waking up to music
- 7 Press or repeatedly until the music source you want appears. The indications change as follows:
- 8 Press ENTER/NEXT.
- 9 Turn off the system.
- To check the setting
- To cancel the timer operation
  - Tip
  - Notes
Timer-recording radio programs
4,5
- 1 Time in the preset radio station (see "Listening to the radio" on page 13).
- 2 Press CLOCK/TIMER SET.
- 3 Press or appears.
- To cancel the timer operation
  - Notes
Precautions
- On operating voltage
- On safety
- On placement
- On operation
- Notes on CDs
- Cleaning the cabinet
- To save a tape permanently
- Before placing a cassette in the tape deck
- When using a tape longer than 90 minutes
- Cleaning the tape heads
- Demagnetizing the tape heads
Troubleshooting
- There is severe hum or noise.
- The timer does not function.
- The remote does not function.
- There is acoustic feedback.
- Sound comes from one channel or unbalanced left and right volume.
- The CD tray does not close.
- If Other troubles not described above occur, reset the system as follows:
Specifications
- AUDIO POWER SPECIFICATIONS:
- Amplifier section
Index
- H, I, J, K. L, M
- T, U, V, W, X, Y, Z