Jack type, Note – Sony MHC-RXD3 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connect the FM/AM antennas.

Set up the AM loop antenna, then
connect it.

Jack type ®

AM loop
antenna

Extend the FM lead
antenna horizontally.

Jack type ®

AM loop
antenna

Extend the FM lead
antenna horizontally.

Q Set VOLTAGE SELECTOR to the

position of your locd power line
voltage (for models with a voltage
selector).

VOLTAGE

SELECTOR

1 0-ulw

I Connect the power cord to a wall

outlet.

The demonstration appears in the
display.

If the plug on this unit does not fit your
wall outlet, attach the supplied plug
adaptor (for Asian model).

I Deactivate the demonstration mode

by pressing DBPLAY/DEMO when

the system is turned off.

The demonstration mode is also
deactivated when you set the time.

Inserting two size AAA (R03)
batteries into the remote

With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace bothhatteries with new ones.

Note

If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.