Sony MHC-RXD3 - Manual (Page 34)

Specifications
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION;
with 6 ohm loads both channels driven, from
70 - 20,000 Hz; rated 50 watts per charmel
minimum RMS power, with no more than
0.97o total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
North American model
Continuous RMS power output
60 watts + 60 watts
(6 ohms at I kHz.
1 0 % T H D )
European model
DIN power output (Rated)
40 watts + 40 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
50 watts + 50 watts
(6 ohms at 1 kHz,
10"/,> THD)
Music power output (Reference)
UX) watts + lOtl watts
(6 ohms at 1 kHz,
Itr/o THD)
Other models
The following measured at AC 110, 220 V 60 Hz;
DIN power output (Rated)
45 watts + 45 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
50 watts + 50 watts
(6 ohms at 1 kHz,
10% THD) '
The following measured at AC 120, 240 V 60 Hz;
DIN pK3wer output (Rated)
50 watts + 50 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
60 watts + 60 watts
(6 ohms at 1 kHz,
10% THD)
Inputs
MD IN (phono jacks): voltage 450 mV,
impedance 47 kilohms
Outputs
MD OUT (phono jacks):
voltage 250 mV
impedance 1 kilohm
PHONES (stereo phone jack):
accepts headphones of
8 ohms or more.
SPEAKER: accepts impedance of 6 to
16 ohms
CD player section
System
Laser
Laser output
Compact disc and digital
audio system
Semiconductor laser
(K = 780 nm)
Emission duration:
continuous
Max. 44.6 /iW*
• This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
20 Hz-20 kHz (±0.5 dB)
780 - 790 nm
Frequency response
Wavelength
DIGITAL OUT (OPTICAL)
(Square optical connector jack, rear panel)
Wavelength
6(K) nm
Output Level -18 dBm
Tape deck section
Recording system
Frequency response
Wow and flutter
4-track 2-channeI stereo
40 -13,000 Hz (±3 dB),
using Sony TYPE I
cassette
±0.15% W.Peak (lEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
34