Sony MHC-RXD3 - Manual (Page 11)

1
Press A OPEN/CLOSE and place
up to two CDs on the disc tray.
If a disc is not placed properly, it will not
be recognized.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
To insert a third disc, press DISC SKIP/
EX-CHANGE to rotate the disc tray.
Press one of the DISC 1-3 buttons.
The disc tray closes and play starts.
If you press CD ►!! (or CD ►- on the
remote) when the disc tray is closed,
play starts from the CD loaded on the
disc tray whose number is displayed.
Disc tray number Playing time
Track number
To Do this
Stop play Press ■.
Pause Press CD ►!! (or II on the
remote). Press again to resume
play.
Go to the next
track or go
back to the
start of the
current track During play or pause, press
►W (to go forward) or (to
go back).
Find a point in
a track Press and hold down ►► or
during play and release it
at the désirai point.
Select a CD
in stop mode
Press DISC 1 - 3 or
DISC SKIP/EX-CHANGE.
Play only the
CD you have
selected
Press PLAY MODE repeatedly
until "1 DISC" appears.
Play all CDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove the CD Press ± OPEN/CLOSE.
Exchange other
CDs while
playing
Press DISC SKIP/
EX-CHANGE.
Adjust the
volume Turn VOLUME (or press
VOL +/- on the remote).
Tips
• Pressing CD ►'ll when the system is off
automatically turns the system on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD ►!! or DISC 1-3 (Automatic Source
Selection).
• If there is no CD in the player, "CD NO DISC"
appears in tfie display.
fl
I
i
o
a
M
m