Sony MHC-RXD3 - Manual (Page 21)

6
To program additional tracks,
repeat steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press CD
►'ll
(or CD on the
remote).
All the tracks play in the order you
selected.
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To Press
Check the program CHECK on the remote
repeatedly. After the last
track, "CHECK END"
appears.
Clear a track from
the end CLEAR on the remote in
stop mode.
Clear a specific
track CHECK on the remote
repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
Add a track to the
program 1 Select a disc tray with a
DISC 1-3 button.
2 Select the track by
pressing or
repeatedly.
3 Press ENTER/NEXT.
Clear the entire
program ■ once in stop mode or
twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press CD ►ll
to play the same program again.
• I f a p p e a r s instead of the total playing time
during programming, this means:
- you have programmed a track number
which exceeds 20, or
- the total playing time has exceeded 100 minutes.
21