Dubbing tapes (from deck a to b), Press high speed dubbing, Select the side on which to start dubbing – Sony HCD-541 User Manual
Page 20: To dub from the front side, press 0, To dub from the reverse side, press <3, 5 press ii on deck b to start dubbing, Notes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dubbing Tapes (from Deck A to B)
This section describes about the operation of the recording from deck A to B.
Press to open the cassette compartments,
insert the tapes and close the cassette
compartments.
Recorded tape
Blank tape
Select the direction mode.
One side
s=eS> RELAY
DIREC^
Both sides
SIS ^3
relay
Dubbing of the
reverse side
1 DP 1 starts
DIRECTION independenUy
■iip.
of
deck A.
RELAY Dubbing of the
—1
1
1
— reverse side
1 gPI starts
DIRECTION simultaneously
withdedcA.
Press HIGH SPEED DUBBING.
The unit enters recording pause mode for high speed
dubbing, the
II
and i
re
^I indicators light.
Pubbing can not be carried out without pressing
HIGH SPEED DUBBING.)
HIGHSPEED
DUBBING
Select the side on which to start dubbing.
To dub
from the front side,
press 0-.
To dub
from the reverse side,
press <3.
5
Press II on deck B to start dubbing
The recording pause mode will be canceled and
dubbing starts.
PAUSE
The
II
indicator goes
off.
To stop dubbing,
press ■ on deck A or deck 6.
Notes
* The tape in deck B is automatically recorded with the same
recording system as the original tape in deck A. So it is
unnecessary to adjust the recording level and selecting the
DOLBY NR.
• If the sound is affected by a television set during dubbing,
turn
off
the set or move it away from the unit.
20