Sony STR-D965 - Manual (Page 8)

Getting Started
MONITOR
If you use a TV monitor, do not connect anything to the
TV VIDEO IN jack.
Receiver TV Monitor
INPUT
VIDEO
VCR (via the VIDE01 jacks)
If you have two VCRs connect the second one to the VIDEO 2
jacks.
Receiver VCR
Receiver LD
Camcorder
Use the VIDEO 3 INPUT on the front panel (STR-D965 only).
You cannot record on the camcorder (or VCR) connected to the
VIDEO 3 INPUT jacks.
Receiver Camcorder
V©€03 INPUT
I vioMTLMJoioR I
"j-uzi
Where do / go next?
Go on to the next section to connect an AC plug and
complete your home theater system.
AC Hookups
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
If you cormect other audio components to the
SWITCHED AC OUTLETS on the receiver, the receiver
can supply power to the connected components so you
can turn on/off whole system when you turn on/off
the receiver.
SWITCHED AC OUTLETS
Caution
Make sure that the power coiasumption of the component
connected to the receiver's AC outlet does not exceed 120
watts. Do not cormect high-wattage electrical home appliances
such as electric irons, fans, or TVs to this outlet.
Where do / go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.
Before You Use Your Receiver
Before you start using your receiver, make sure that
you have;
• Turned MASTER VOLUME to the leftmost
position (0).
• Selected the appropriate speaker system. (For
details, see "Selecting the speaker system" on
page 7.)
• Set BALANCE to the center position.
Turn on the receiver and check the following
indicators.
•
• Press MUTING if the MUTING indicator turns on.
8