Sony STR-D965 - Manual (Page 27)

Remote Button Descriptions
Remote Button Descriptions
For buttons not described on previous pages and buttons w'ith names different from the buttons on the main unit.
Remote
Button Operates Function
0-9 Receiver Selects preset numbers.
CD player/MD
recorder LD
player Selects track numbers,
0 selects track 10.
—
TV/VCR Selects channel numbers.
>10 CD player/
Tape deck/
LD player/
MD recorder Selects track numbers over
10.
CH/PRESET Receiver Scans and selects preset
stations.
TV/VCR Selects preset channels.
INDEX Receiver Selects station index names
for index select tuning.
D. SKIP CD player Skips discs (CD player
with multi-disc changer
only.)
CD player Searches tracks (forward or
backward).
Tape deck/MD
recorder/VCR/
LD player Fastforwards or rewinds.
CD player/
MD recorder/
LD player Skips tracks.
II CD player/
Tape deck/MD
recorder/LD
player/VCR
Pauses play or record.
(Also starts recording with
components in record
standby.)
► CD player/
Tape deck/MD
recorder/LD
player/VCR Starts play.
■ CD player/
Tape deck/MD
recorder/LD
player/VCR
Stops play.
Tape deck Starts play on the reverse
side.
• Tape deck Sets tape decks to the
record standby mode.
• + ► Tape deck/
MD recorder/
VCR
Starts recording when
pressed with ►- (or on
tape deck).
Remote
Button Operates Function
RMS
DIRECTION Tape deck Selects tape direcbon (for
tape decks with the RMS*
function.)
RMS CLEAR Tape deck Clears RMS* program (for
tape decks with the RMS
function.)
RMS/START Tape deck Programs tracks (tap>e deck
with the RMS’ function
only).
ENTER TV/VCR Changes channels when
used with 0-9.
TV/VIDEO TV/VCR Selects input signal: TV
input or video input.
VISUAL
POWER TV/VCR/LD
player Turns on or off the power.
TV CONTROL
ON TV Turns on the TV, switches
the input to "TV," and sets
the remote to operate the
TV.
TV Selects the channel entry
mode, either one or two
digit (in Europe only).
SUB CH+/- TV Selects preset channels for
the small picture.”
POSI TV Changes the position of the
small picture.”
SWAP TV Swaps the small and the
large picture.”
PINP TV Activates the picture-in­
picture function.”
JUMP TV Jumps back and forth
between the previous and
current channels.
ANTTV/VTR VCR Selects output signal from
the antenna terminal: T\''
signal or VCR program.
RMS: Random Music Sensor
** Only for Sony TVs with the picture-in-picture function
27