Sony STR-D965 - Manual (Page 14)

Receiver Operations
Recording on a video tape
You can record from a VCR, a TV, or a LD player using
the receiver. You can also add audio from a variety of
audio sources when editing a video tape. See your VCR
or LD player's instruction manual if you need help.
Using the Sleep Timer [j
You can set the receiver to turn off automatically at a
time you specify.
1 Press one of the function buttons to select the
program source to be recorded.
2 Set the component to be ready for playing.
For example, insert the laser disc you want to record
from into the LD player.
3 Insert a blank video tape into the VCR (VIDEO 1 or
VIDEO 2) for recording.
4 Start recording on the recording VCR and then start
playing the video tape or laser disc you want to
record.
'Q' You can replace audio while copying a video tape or
laser disc
At the point you want to start adding different sound,
press another function button (for example, CD) and start
playback. The sound from the selected component will be
recorded over the original audio.
SLEEP a
I __I CD CD CD CD
CD CD CD CD CD CD
o o o
CD
o o o
CD
o o o
CD
o o o
CD
CD CD CD CD CD
CD CD CD CD CD CD
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown
below.
2:00:00 —► 1:30:00 —► 1:00:00 -♦ 0:30:00 —► OFF j—» z:UU:i
□
The display dims after you specify the time.
To resume recording the sound of the original playback
source, press the function button for that component.
'Q' You can freely specify the time
Press SLEEP first, then specify the time you want using
the digital processing control (A or V) buttons. The
sleep time changes in 1 minute intervals. You can specify
up to 5 hours.
'Q' You can check the time remaining before the receiver
turns off
Press SLEEP. The remaining time appears in the display.
14