Mounting the phone on a wall – Sony IT-M602 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
Mounting the phone on a wall
1 Remove the hang-up tab and
replace it upside down.
Attach the AC power adaptor
cord and the telephone line
cord(s) to the wall bracket.
Use the shorter line cord for
mounting.
Hook the wall bracket to the
wall plate, and plug the
telephone line cord(s) into the
telephone outlet(s). Plug the
telephone line cord into the
input jack on the computer or
FAX, etc., if necessary.
Instead of hooking to the wall
plate, you can mount the wall
bracket directly using the four
supplied screws.
Plug the other end of the
telephone line cord(s) into the
LINE 1/LINE 1+2, LINE 2 and/
or DATA jacks.
Insert the upper tabs first, then
press the phone into the wall
bracket so that the lower tabs on
the wall bracket go into the
phone.