Sony IT-M602 - Manual (Page 20)

One-touch dialing (continued)
5
6
Press (PROGRAM).
Enter the phone number by pressing the
dialing keys.
You can enter up to 16 digits, including a tone
and a pause, each of which is counted as one
digit.
/ Press (PROGRAM).
You will hear a long confirmation beep, and the name and the number
are stored. The display goes off.
Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tip
If you have entered a number incorrectly in step 6, press fPROGRAM), then start
from the beginning.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 6, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press (PAUSE).
Advanced Features