Sony IJP-V100 - Manual (Page 12)

5 .
Now il's time to load bltiiik jiapor into the paper supply ira\. tarsi,
quick description of the three paits r)l' the paper/rkrcumenl ira\:
I'ajH'i' stippK tra\ - Use this lra\ lo
load blank paper or a star k ol
envelopes.
Single-envelope tray - Use this tray
to print on a single envelope.
Document loading tray - Use this
tray lo load your original documents
print-side away from you and top-
down for faxing, copying, and
scanning.
• Pull the front document loading tiay forward all the way.
• The paper supply tray is factory set for letter- and legal-size
paper. If necessary, adjust the paper guides by pinching and slid­
ing them.
Stack
guides
• Load up to 150 sheets
of 20-lb paper (about a
1/2-inch-thick stack)
into the paper supply
tray. Make sure the
stack of paper fits
behind the stack
guides on the lower
part of the tray as
shown. Load sheets
with the print side fac­
ing toward you.
• Push the front document loading tray backward until it rests
against the paper tray.
Note; Refer to Chapter 6 for detailed instructions on loading enve­
lopes and other special paper/media types.
1-6