Sony IJP-V100 - Manual (Page 11)

Remove the black print cartridge from its packaging.
Holding the blue top of the cartridge, gently remove
both pieces of tape - clear blue and solid white -
covering the ink nozzles and vent hole. (If you don’t
remove the white tape, the ink cartridge will be
depleted prematurely.)
Be careful not to touch the ink nozzles or the copper
contacts; fingerprints may damage them.
Next, place the
black print car­
tridge into the left
cartridge holder
as shown:
1 ) First slide in the
bottom until it
clicks into place.
2) Then push the
top forward until
the cartridge snaps
into place.
• Remove the color print cartridge from its packaging. Peel off the
clear blue tape covering the ink nozzles, then place the color print
cartridge into the right cartridge holder and push it forward until
it snaps into place. Again, try not to touch the ink nozzles or cop­
per contacts.
• Close the Sony IJP-VIOO's cover.
Note: If the print cartridge holder moves out of sight before you fin­
ish inserting both print cartridges, close the cover all the way. then
open it again; the holder will come back into view. To prevent ink
dr\ ing and clogging the nozzles, the holder will return to the parked
position after a few minutes.