Mic jack (plug in power), Camera recording/battery lamp (p. 13), Remote sensor (p. 84) – Sony CCD-TRV615 User Manual
Page 83: Microphone, To watch the demonstration, To enter demo mode, To exit demo mode, Identifying the parts
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identifying the parts
MIC jack (PLUG IN POWER)
Connect an external nucrophone (not
supplied). This jack also accepts a
"plug-in-power" microphone.
Camera recording/battery lamp
(p. 13)
LASER LINK emitter
(CCD-TRV35/
TRV65/TRV315/TRV615 only) (p. 56)
Remote sensor
(p. 84)
Aim the Remote Commander here for
remote control.
Microphone
To watch the demonstration
You can start the demonstration by setting DEMO MODE in the menu system.
Yoifcan also start the demonstration by the following operation.
When NIGHTSHOT is set to ON, you cannot watch the demonstration (CCD-TRV35/
TRV65/TRV315/TRV615 only).
To enter demo mode
(1)
Eject the cassette and set the POWER switch to VTR/PLAYER.
(2)
Turn STANDBY up to STANDBY.
(3)
While holding down ► set the POWER switch to CAMERA.
To exit demo mode
(1) Set the POWER switch to VTR/PLAYER.
(2)
Turn STANDBY up to STANDBY.
(3)
While holding down ■ set the POWER switch to CAMERA.
83