Sony CCD-TRV615 - Manual (Page 26)

r
Advanced operations
Using alternative power sources
You can choose any of the following power sources for your camcorder: battery pack,
house current, alkaline batteries (CCD-TRV15/TRV25/TRV35/TRV65 only) and 12/24
V car battery. Choose the appropriate power source depending on where you want to
use your camcorder.
Place Power source Accessory to be used
Indoors House current Supplied AC power adaptor
Outdoors Battery pack Battery pack NP-F330 (supplied), NP-F530,
NP-F550, NP-F730, NP-F730H, NP-F750, NP-F930,
NP-F950
Size AA (LR6)
Alkaline battery Supplied battery case (CCD-TRVI5/TRV25/
TRV35/TRV65 only)
In the car 12 V or 24 V car battery Sony car battery charger DC-V515A
Notes on power sources
• Disconnecting the power source or removing the battery pack during recording or
playback may damage the inserted tape.
•The DC IN jack has power source priority. This means that the battery pack cannot
supply any power if the power cord is coimected to the DC IN jack, even when the
power cord is not plugg^ into a wall outlet.
(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN
jack on the camcorder.
( 2 ) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
WARNING
The power cord must only be changed at a qualified service shop.
PRECAUTION
The set is not discormected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
26
Note
Keep the AC power adaptor away from the camcorder if the picture is disturbed.