Sony CMT-ED1 - Manual (Page 5)

Attach the speakers.
Facing the front of the unit, attach the
speaker connected to the SPEAKER R
jack onto the right side of the unit and
the speaker connected to the
SPEAKER L jack onto tiie left side of
the unit.
Q Set VOLTAGE SELECTOR to the
position of your local power line
voltage (except for North American
model.)
220-240V
U
VOLTAGE SELECTOR
110-120V
El Reinstall the rear cover.
Put the wires through the hole at the
bottom of the rear cover.
I
Turn the unit upside down holding
the glass door with firm hand and
set the speaker cord into a groove of
the unit.
d Connect the power cord to a wall
outlet.
Note on the glass door of CD player
The CD player cover of the CMT-EDl is made of
tempered glass.
Under normal conditions, this tempered glass is
more shock resistant and able to bear more
weight than ordinarc^ glass. This glass, however,
may shatter if it receives a sharp blow or if it is
scratched.
To detach the speakers
1 Slide the speakers in the opposite
direction of the arrows of the
illustration in "Attach the speakers"
(see step
0 -3 on this page.)
2 After detaching the speakers, set the
speaker cords into the speaker cord
groove at the bottom of the speaker.
Otherwise, the speaker cord could be
damaged.