Sony CMT-ED1 - Manual (Page 17)

Tips
• lo record non-preset stations, select "MANUAL"
in step 3, then press TUNING +/- (or lKK]/t>{>H)
on the remote) to tune in the desired station.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR on
the remote before step 8 so appears.
• If noise is heard while recording from the radio,
remove the antenna and put the antenna out of the
cabinet ( See "To remove the AM antenna" on the
page 6 ) to reduce the noise.
Note
You cannot record from the reverse side.
P
fit
o
3
w
17