Custom audio adjustment, Bbe system, Volume control – Sony AV-DV75 User Manual
Page 9: To mute the sound temporarily, Super t-bass system, Press the t-bass button, Sound adjustment during recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CUSTOM AUDIO ADJUSTMENT
DOWN,UP VOLUME
MUTING
•>1
BBE
- T-BASS
-BBE
-VOLUME
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
Press the BBE button.
Each time it is pressed, the level changes. Select one of th(3
three levels, or the off position to suit your preference.
T]
CO
'Z.
o
flQ
£>. (0 LU a CL BALANCE T-BASS (cancel) VOLUME CONTROL Turn the VOLUME control on the unit, or press the VOLUME buttons on the remote control. The volume level is shown on the display for four seconds. It can be adjusted between 0 and MAX (31). It flashes when set over the level of 21. is set to more than 17, it is automatically set to 16 the next time the power is turned on. To adjust the left/right balance of the front speakers Press the BALANCE button to display ‘‘L/R OdB”. Then press the DOWN or UP button repeatedly or turn the MULTI JOG within Note that the front speaker balance for the Dolby Digital and Dolby Pro Logic modes is also changed. To mute the sound temporarily Press the MUTING button (-20 dB). “MUTE ON” appears on the display for four seconds. While muting MUTING button again to restore the sound. ’ The BBE system is automatically canceled; - When the DIGITAL (Dolby Digital) mode is selected ' The BBE system cannot be turned on: - While the DIGITAL (Dolby Digital) mode is selected SUPER T-BASS SYSTEM The T-BASS system enhances the realism of low-frequency sound. Press the T-BASS button. three levels, or the off position to suit your preference. I'.ill iie'.V.-:;:;: C7 (cancel) HBBB Low-frequency sound may be distorted when the T-B ASS system originally emphasized. In this case, cancel the T-BASS system. SOUND ADJUSTMENT DURING RECORDING The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording. ENGLISH 8
The volume level remains memorized even after the power is
turned off. However, if the power is turned off when the volume
four seconds.
the sound, the selected function indicator flashes. Press the
- When the Dolby Pro Logic is turned on
- While the Dolby Pro Logic is turned on
Each time it is pressed, the level changes. Select one of the
is used for a disc or tape in which low-frequency sound is