Audio output mode, 2 channel, 1 channel – Sony BDP-S301 User Manual

Page 51: Speaker setup, Next screen, Speakers

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Speakers

The

following

items

are

necessary

when

using

the

5.1CH

OUTPUT jacks.

The default settings are underlined.

Audio Output Mode

-For analoe connection.

2 Channel

-Select this when connecting to an AV amplifier (receiver) using the AUDIO OUT (L/

R) jacks.

5.1 Channel

-Select this when connecting to an AV amplifier (receiver) using the 5. i CH OUTPUT

jacks.

Speaker Setup

-This setting affects the output from the

5.1CH OUTPUT jacks.

Next Screen

1 Select the speaker setting that needs adjusting by pressing 'i/^.

• “C” (center speaker): “Yes” or “No”
• “Ls/Rs” (left surround speaker/right surround speaker): “Yes” or “No”
• “L/R” (left front speaker/right front speaker): “Large” or “Small”

2 Adjust the setting by pressing

• For “C” and “Ls/Rs,” select whether the speakers are included in your system.
• For “L/R,” select the size. This setting is disabled if either of “C” or “Ls/Rs” is set

to “No.”

3 Press ENTER to save the adjustments.

C/9