Sony BDP-S301 - Manual (Page 10)

step 2: Connecting the
Video Cords/HDMI Cord
d) Connecting to an S VIDEO input jack
Connect using an S VIDEO cord (not supplied). You will enjoy
high quality images.
Blu-ray Disc player
Connect this player to your TV monitor, projector or AV
amplifier (receiver) using a video cord. Select one of the patterns
(A) through (5), according to the input jack on your TV monitor,
projector or AV amplifier (receiver).
In order to view' lOSOp progressive signals with a compatible
TV, projector, or monitor with an HDMI input jack, you must
select pattern ®. You can use pattern © to view' 4S0p/720p
progre,ssive signals or lOSOi interlace signals on a compatible
device with component video input jacks.
® Connecting to a video input jack
Connect the supplied video cord (yellow) to the yellow (video)
jack. You will enjoy standard quality images.
Blu-ray Disc player
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To
change the aspect ratio, see page 45.
Do not connect a VCR, etc., bctw'cen your TV and the player. If you pass
the player signals via the VCR. you may not receive a clear image on the
TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
© Connecting to component video
input jacks (Y, P b , P r )
Connect llie comptmcnl via the COMPONENT VIDEO OUT jacks
using a component video cord (not supplied) or three video cords
(not supplied) of the same kind and length. You will enjoy accurate
color reproduction and high quality images. You can also enjoy
higher quality pictures from 4S0p/720p progressive signals or lOSOi
interlace signals, if your TV, projector or AV amplifier (receiver) is
compatible.
Blu-ray Disc playe
iiil
-y- KSt. «
COMPONENT
'■ VIDEO OUT
Component video
cord (not supplied)
TV, projector, or AV
amplifier (receiver)
; Signal flow
directly
10