Sony BDP-S301 - Manual (Page 48)

About the audio output signals
The audio output differs as follows, depending on the source, output jack, and the selected settings.
Disc/soLirce
Jncks/
settings
AUDIO OUT UR jacks '
2ch 5.1 ch
DIGITAL OUT (OPTICAL/
COAXIAL) jacks
PCM Bitstream
HDMI OUT jack-
PCM^ Auto^^
RR-
Linear PCM 2ch
ROM
2eh 2eh 2ch LI’CM 2ch LPCM 2ch LPCM 2mLP'_M
....... 5.1 ch»’ 2ch Downmix .i.lch
2ch Downmix
LPCM
2ch Downmix
LPCM
5.Ich LPCM 5.Ich LPCM
7.1ch 2ch Downmix
5. Ich
Downmix 2ch Downmix
LPCM
2ch Downmix
LPCM
7.Ich LPCM 7.Ich LPCM
Dolby Digital 2ch Downmix .o.lch
2ch Dow nmix
LPCM
Dolby Digital .7.Ich LPCM Dolby Digital
Dolby Digital Plus 2ch Downmix .ô.lch
2ch Downmix
LPCM
Dolby Digital 7.Ich LPCM»’ Dolby Digital
Dolby TrueHD 2ch Downmix .ó.lch
2ch Downmix
LPCM
Dolby Digital -5.Ich LPCM Dolby Digital
DTS 2ch Downmix .ó. Ich
2ch Downmix
LPCM
DTS -5.Ich LPCM DTS
DTS-HD 2ch Downmix -î.lch
2ch Dow nmix
LPCM
DTS 5.Ich LPCM DTS
Linear PCM 2ch 2ch 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM
Dolby Digital 2ch Downmix 5. Ich
2ch Downmix
LPCM
Dolby Digital 5.Ich LPCM Dolby Digital
DTS 2ch Downmix 5. Ich
2ch Downmix
LPCM
DTS 5.Ich LPCM DTS
MPEG 2ch 2ch 2ch LPCM — 2ch LPCM 2ch LPCM
rn
Linear PCM 2ch 2ch 2ch 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM
DTS 2ch Downmix 5. Ich
2ch Downmix
LPCM
DTS 5.Ich LPCM DTS
"2 Chauner' and "5.1 Channel" ane selectable under "Audio Output Mode" in "Speakers" Setup (page 51).
PCM : when "Dolby Digital“ or "DTS" in "Audio Setup" is set to "Downmix PCM“ (page 47).
Bitstream : when "Dolby Digital" or "DTS" in "Audio Setup" is set to "Dolby Digital" or "DTS" (page 47).
Selectable under "Audio (HDMI)" in ''Audio Setup" (page 47).
Selectable under ''Audio (HDMI)" in "Audio Setup" (page 47). Resulting output may differ depending on the connected HDMI device.
When the sampling frequency is 192 kHz, the player downmixes to 2ch signals even if the disc or source is 5.1 ch.
Outputs 7. Ich LPCM signals decoded from Dolby Digital Plus audio stream.
48