Sony BDP-S301 - Manual (Page 46)

To set the video output resolution
Press VIDEO FORMAT repeatedly to select the desired resolution. Note that the resolution differs depending on the display device,
connecting jack and the source material as below.
Settings
Connecting
----- jack HDMI OUT COMPONENT VIDEO OUT VIDEO/S VIDEO
Auto Automatically selects the
recommended resolution acceptahle
for your TV. 480i 480i
4801 480i 480i 480i
480p 480p 480p 480i
720p 720p BD:720p, DVD:480p*^ 480i
10801 lOSOi BD: 10801, DVD:480p*-’ 480i
1080p lOSOp 480i 480i
Source Direct Output differs depending on source
materiah'"^
Output differs depending on source
material
480i
Outputs in the same resolution and frequency as recorded on the dise.
’ l080/24p video signals are not output from the COMPONENT VIDEO OUT jacks.
’ Outputs in the resolution of the original setting (720p or I080i) wheti the DVD is not copy guarded.
Notes
• If the picture is not clear, natural or to your satisfaction, try another resolution that suits the disc arid your TV/projector, etc. For the details, refer also
to the instruction manual supplied with the TV/projector, etc.
• 480i or480p video signals may be ontpn! when you connect to the COMPONENT VIDEO OUT jacks and play some copy-guarded BDs/DVDs. To
enjoy the HD quality resolution in this case, connect the display device to the HDMl OUT jack using an HDMI cord.
• Even when you select a setting other than ”Auto,'' the player automatically adjusts the video signals if the TV cannot accept the set resolution.
To output the l080/24p video signals
A 1080/24p-compatible TV is required for this setting.
1
Set “24p Output” in “Video Setup” to “On” (page 45).
2
Press VIDEO FORMAT repeatedly to select “Auto” or “Source Direct.”
If there is no picture, press VIDEO FORMAT repeatedly until the picture appears correctly.
46