Sony NW-S205FBLACK User Manual
Nw-s200 series
NW-S202F/S203F/S205F/S202 [CEW] 2-894-106-11(1)
English
Note on using
On transferring from the computer
When you transfer songs to this player, use the supplied SonicStage software. Songs which are transferred to
the player without using the supplied SonicStage software cannot be played back on the player.
On the format
Be sure to format the built-in flash memory using the Menu mode on this player following the procedure below.
(Check all contents before formatting as all data stored will be erased.)
1.
Press and hold the DISP/HOME button in stop mode until the HOME screen
appears.
2.
Select
(SETTINGS) – “Advanced Menu>” – “Initialize>” – “Format>” – “OK,”
in this order.
Rotate the shuttle switch to select the item and press the
button to confirm.
After selecting “OK” and confirming, “FORMATTING...” appears and formatting starts. When formatting
is complete, “COMPLETE” appears.
If you format the built-in flash memory using Windows Explorer, “FORMAT ERROR”
may appear on this player and any song may not play back, even if it is transferred by
SonicStage. In this case, format the built-in memory on this player.
© 2006 Sony Corporation Printed in Malaysia
2-894-106-
11(1)
NW-S200 Series