Sony BDP-S301 - Manual (Page 47)

Audio Setup
Underlined items are the default settings. Since many factors
affect the type of audio output, see also "About the audio oiirpur
si goals" on page 48.
Dolby Digital Dolby Digital
-Select the audio signals output when playing
Dolby Digital discs. This setting affects the
output from the DIGITAL OUT (COAXIAL
or OPTICAL) jack.
-Select this when connecting to a device with a built-in Dolby Digital decoder.
Downmix PCM
-Converts to output Linear PCM signals. Select this when connecting to a device
without a built-in Dolby Digital decoder.
DTS
-Select the audio signals output when playing
DTS discs. This setting affects the output
from the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
-Select this when connecting to a device with a built-in DTS decoder.
Downmix PCM
-Converts to output Linear PCM signals. Select this when connecting to a device
without a built-in DTS decoder.
DTS Downmix
-Select the type of 2-channel signals when
down-mixed from multi-channel DTS
sources (effective for audio connections
when “DTS” is set to “Downmix PCM”).
Stereo
-Downmixes multi-channel audio signals for two channel stereo.
Lt/Rt
-Allows you to hear surround sound when the connected device has a built-in Dolby
Pro Logic decoder.
Audio (HDMI)
-Select the output method from the HDMI
OUT jack.
Auto
-Normally, select this. Outputs audio signals according to the status of the connected
HDMI device.
PCM
-Converts all audio signals to Linear PCM.
O
as
(O
(Q
CD
S'
CO
CD
(Q
00
*^continued
47