Connection, Your setup, Notes about the hdmi out jack – Sony BDP-S301 User Manual
Page 12: Step 3: connecting the audio cords
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 3: Connecting the
Audio Cords
Select the connection that best suits your system. Be sure to read
the instructions for the components you wish to connect.
Connection
TV
Stereo amplifier (receiver) and
two speakers
AV amplifier (receiver) having a
Dolby ' Surround (Pro Logic)
decoder and 3 to 6 speakers
• Surround effects: Dolby Surround
(Pro Logic)
AV amplifier (receiver) with
S.lch input jacks and 6 speakers
• Surround effects: Dolby Digital
(S.lch), DTS(5.1ch) ’
"
AV amplifier (receiver) with a
digital input jack having a Dolby
Digital or DTS ■ decoder and 6
speakers
• Surround effects: Dolby Digital
(S.lch). DTS (S.lch)
AV amplifier (receiver) with an
HDMI input jack and 8 speakers
• Surround effects: 8ch Linear
PCM
Your setup
ManufacUired under license from Dolby laboratories.
"Dolby.” "Pro Logic.” and the double-D symbol are trademarks of
Dolby Laboratories.
■ “DTS” and “DTS Digital Surround” are registered trademarks of
DTS, Inc.
Notes about the HDMI OUT jack
• When you connect the player to an AV amplifier (receiver)
using an HDMI cord, you will need to do one of the following:
-Connect the AV amplifier (receiver) to a TV with the HDMI
cord,
-Connect the player to the TV with a video cord other than an
HDMI
cord
(component
video
cord,
S
VIDEO
cord,
or
video
cord).
•
When
connecting
to
the
HDMI
OUT
jack,
carefully
align
the
HDMI connector with the jack. Do not bend or apply pre.s.sure
to the HDMI cord.
• If you change the component connected to the HDMI OUT
jack, change “Audio (HDMI)” in “Audio Setup” to match the
new component
(page 47).
The player stores the HDMI related
settings for up to five components.
• The HDMI connection is compatible with 2ch Linear PCM
signals (48 to 192 kHz, 16/20/24 bit), and 6 to Sch Linear PCM
signals (48 to 96 kHz, 16/20/24 bit), in addition to Dolby
Digital and DTS bit stream (5. Ich signals up to 96 kHz, 16/20/
24bit),
If you connect a component that does not conform to the selected audio
signal, a loud noise (or no sound) will conic out from the speakers, w'hich
could damage your ears or spetikcrs.
1 2