Sony AIWA NSX-V50 - Manual (Page 40)

RECORDING
DECK 1/2
___TAPE__ I
SYNC DUB
NORM/HIGH
i\ /■ li i I ij .
I >; ■■ j j u J . I
i I ~ i I I n
n ■■ ±1 I-I J.I
DUBBING THE WHOLE TAPE
This function allows you to make exact copies of both sides of
the original tape.
The reverse side of both tapes wiii start simultaneously as soon
as the longer tape has been reversed.
• Dubbing does not start from a point halfway in the tape.
• The reverse mode is automaticaily set to
• The Doiby NR does not affect recording.
1 Press the TAPE button.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
first facing the foreground.
3 Press the SYNC DUB button once or twice to start
recording.
For recording at normal speed:
Press it once to dispiay N-DUB.
For recording at high speed:
Press it twice to display H-DUB.
The tapes are rewound to the beginning of the front sides,
and then recording starts.
To stop dubbing
Press the ■ button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
' Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
■ if the leader segment of the tape to be recorded on is ionger
than that of the original tape, recording on the reverse side
may stop midway through the recording, in this case, dub each
side manually following the procedure in “DUBBING THE TAPE
MANUALLY”.
40