Connection with tv, Playing cd graphics discs, 1 turn on the tv and select the video input of tv – Sony AIWA NSX-V50 User Manual
Page 30: 2 press the cd button, 3 load the disc(s) on to the disc compartment, Cd graphics
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD PLAYING
CD GRAPHICS
(NSX-V51G only)_________
CONNECTION WITH TV □
Only a TV with the VIDEO input jack can be connected to view
graphics.
Connect the VIDEO OUT jack of the unit to the video input
jack of the TV with the supplied connection cord ©.
PLAYING CD GRAPHICS DISCS
1 Turn on the TV and select the video input of TV.
2 Press the CD button.
3 Load the disc(s) on to the disc compartment.
POWER
2
II
In this case, press the ■ button to stop play and then start again.
Color format setting
The color format of the video image from the unit is factory-set
to PAL. This can be changed to NTSC if necessary.
Press the POWER button while pressing the CD button.
To restore, carry out this procedure again.
If the color format setting does not match the TV, the video
image may distort vertically or deteriorate on the TV.
Formats other than NTSC or PAL, for example NTSC 4.43 or
SECAM, etc., are not applicable for this unit.
30