Sony KP 51HW40 User Manual

Page 75

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

other Information

Problem

You get the same program in the
window picture as in the main
picture

Possible Remedies

□

You cannot get anything but TV i
channels in your second picture

Favorite Channel does not i
display your choices

Some video sources do not 1
appear when you press TV/

VIDEO

Both may be set to the same channel. Try changing channels in either the main
picture or the window picture.
You may be running all your channels through a cable box. The cable box will
only unscramble one signal at a time, so you cannot use the Twin View feature, if
possible, run a direct cable to your projection TV’s VHF/UHF input (this will only
work if your cable system provides an unscrambled signal.)

Be sure the video label has not been set to skip your video inputs. See the Setup

menu on page 59.

Verify that Favorite Channel is set to Manual in the Channel menu (see
“Favorite Channel” on page 53).

Ensure that Video Label is not set to SKIP (see “Video Label” on page 59).