Sony KP 51HW40 - Manual (Page 74)

other Information
Problem Possible Remedies
Projection TV is fixed to one □
channel
□
Use Auto Program in the Channel menu to add receivable channels that are not
presently in TV memory (see page 54).
Check your Channel Fix settings (see page 54).
Double images or ghosts □
Cannot operate menu Ü
IJ
Use a highly directional outdoor antenna or a cable (when the problem is caused by
reflections from nearby mountains or tall buildings).
If the item you want to choose appears in gray, you cannot select it.
Turn the projection TV’s power off and on again.
Cannot receive any channels □
when using cable TV
□
□
Use Auto Program in the Channel menu to add receivable channels that are not
presently in TV memory (see page 54).
Check your cable settings.
Make sure Cable is set to ON in the Channel menu (see page 53).
Cannot gain enough volume □
when using a cable box Increase the volume of the cable box using the cable box’s remote control. Then
press TV (FUNCTION) and adjust the projection TV’s volume.
Channel index does not display □
all available channels □
Cannot receive channels □
Unable to select a channel
Make sure Cable is set to ON in the Channel menu (see “Cable” on page 53).
Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 54).
Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 54).
Lost password □ In the password screen (see page 60), enter the following master password: 4357.
The master password clears your previous password: it cannot be used to
temporarily unblock channels.
Cannot change channels with □
the remote control
□
Be sure you have not inadvertently switched your projection TV from channel 3 or
4 setting if you are using another device to change channels.
If you are using another device to control channels, be sure the “function” button
for that device has been pressed, or the slide switch is set correctly. For example, if
you are using your cable to control channels, be sure to press SAT/CABLE.
Cannot cycle through the other □
video equipment connected to
the projection TV Be sure the Video Label feature has not been set to Skip (see page 59).
There ÍS a black box on the □
screen You have selected a text option in the Setup menu and no text is available, (see
page 5S to reset Setup selections) To turn this feature off, select OFF in the
Caption Vision option. If you were trying to get closed captioning, select CC1
instead of Text 1 -4.
There is no twin picture or it is □
just static □
□
Be sure your twin picture is set to a video source/chamiel that has a program airing.
You may be tuned to a video input with nothing connected to it. Try cycling
through your video inputs using TV/VIDEO.
Twin View is not set to receive a signal from the AUX input. If you have
connected a VCR, DVD player or satellite receiver to the AUX input on the
projeetion TV, it will not show in the seeond picture.
74