Sony KP 51HW40 - Manual (Page 15)

Installing and Connecting the Projection TV
Connection
AUX..............
TO CONVERTER
Description
Allows you to view local and cable channels if your cable
provider does not feature local channels. You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices conneeted to the AUX
input cannot be viewed in Twin View.
__
projection TV to switch between scrambled channels
(through a cable box) and normal cable channels (CATV).
Use this jack instead of a splitter to get better picture
quality when switching between scrambled and
unscrambled cable channels.
\E VHF/UHF
(Rear and front)
VIDEO
(L/R)/AUDiO
(Rear and front)
M Y/P b /P r .................
(L/R)/AUDIO
M t V O U T .................
AUDIO OUT
(VAR/FIX)
L (MONO)/R
CONTROL S
IN/OUT
Connects to your vHF/UHF antenna or cable.
Connects to the S VIDEO OUT jack of your VCR or other
S VlDEO-equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN
jack.
Connects to the audio and video OUT jacks on your VCR
or other video component. A fourth video input (VIDEO
2) is located on the front panel of the projection TV.
Connects to your DVD player’s or Digital Set-top box’s
component video (Y, P
b , P r ) and audio (L/R) jacks.
Connects to an AV receiver for greater control of all audio
and video equipment (see page 30). For detailed
information about connection, refer to the operating
manual supplied with the AV receiver.
Connects to the left and right audio inputs of your audio or
video component.
To control other Sony equipment with the projeetion TVs
remote control, connect the CONTROL S IN jack of the
equipment to the CONTROL S OUT jack on the
projeetion TV with the CONTROL S cable.
To control the projection TV with a remote control for
another Sony product, connect the CONTROL S OUT
jack of the equipment to the CONTROL S IN jack on the
projeetion TV with the CONTROL S cable.
3
ÌQ
ai
3
Q.
O
o
3
3
3
ÌQ
5
m
I
CD
O
15