General setup settings, Language info banner, Mode 1 – Sony BRAVIA KDL52V4100 User Manual

Page 42: Mode 2, Power saving, Light sensor, Pc power management, Initial setup

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

General Setup Settings

Language

Info Banner

Select the language of your choice from

English, Español

and

Français

to be used for

displaying all the on-screen settings.

Displays the program name and the program information such as program title and
program rating (if available from the broadcaster). Select the amount of program
information to display when tuning.

Small

Select to display minimal channel and program information.

Medium

Select to display channel and program information.

Large

Select to display detailed channel and program information.

• Info Banner

appears on the screen each time the channel is changed or when

DISPLAY

on the remote control is pressed.

Home Menu Scrolling

Adjust the navigation speed through menu items.

Standard

Select to scroll quickly with ♦/♦ buttons.

Mode 1

Select to scroll slowly with ♦/♦ buttons.

Mode 2

Select to scroll individually with repeated ♦/♦/•♦/♦ button press.

Power Saving

Reduces the power consumption by adjusting the backlight brightness. This also enhances
the black level. Select from

Off, Low, High

and

Picture Off.

Light Sensor

• While

Picture Off

is set, pressing

VOL

+/- or

MUTING

buttons will not disable this

function. Press other buttons to disable it.

Enables the automatic picture (screen) brightness control. The

Light Sensor

measures

the room brightness which allows the TV to automatically adjust the backlight brightness
based on the picture settings and the ambient room light conditions.

• Be sure not to put anything around the sensor, as its function may be affected (see page 18).
• In low light the range of the backlight control is reduced when the

Light Sensor

is set to

On.

Select

to have the TV automatically enter standby mode when there is no signal input

for more than 30 seconds. The

STANDBY

LED on the front panel illuminates with the

option. Select

Off

to disable this feature.

PC Power
Management

• Press

POWER

to exit from standby mode.

• PC Power Management

is not VESA-compliant.

Logo Illumination

Select

to illuminate the SONY logo on the front panel or select

Off

to disable this

Logo Illumination

function.

available only for KDL-W

Initial Setup

If you missed the Initial Setup when you first connected the TV or if you want to scan all receivable
channels, select Initial Setup. Follow the instructions on the screen. Some settings such as Picture
Adjustments. Sound Adjustments, and Parental Lock will not be affected by this Initial Setup. If
you wish to return your TV to factory settings, please see the Troubleshooting section on page 45.

Favorite

channel list will be cleared each time you run the

Initial Setup.