To turn off the monitor, Note, Muting the sound – Sony KL-W7000 User Manual
Page 13: Watching the picture in wide picture mode, Displaying on-screen information, Watching the video picture in wide mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To turn off the monitor
Press POWER on the remote control. The monitor
enters standby mode and the STANDBY indicator
lights up. To turn off the main power, press the power
switch (green) on the monitor.
Note
• To protect the lamp mounted as a source of light, if you try to
turn on the power within about 30 minutes after the power has
been turned off, the (!) (power) indicator flashes and the
picture does not appear.
Muting the sound
Press MUTING.
"MUTING" appears on the screen.
To restore the sound, press MUTING again, or press
VOL+.
Watching the
picture in wide
picture mode
O
Displaying on-screen information
Press DISPLAY to display the following information on
the screen.
Current input
signal
Picture mode
(page 14)
______ Current input
— signal frequency
' when the RGB
signal* is input
*fh: Horizontal frequency
fv: Vertical frequency
"OUT OF SCAN RANGE" appears if the scanning
frequency range is not within the acceptable
limits. (See page 9.)
To make the on-screen information disappear, press
DISPLAY again.
Watching the video picture in wide
mode
You can enjoy a variety of wide mode picture.
Press WIDE until the mode you want appears
on the screen.
Each time you press WIDE, the mode changes as
follows;
NORMAL -* FULL -► ZOOM -► SUB TITLE -► WIDE ZOOM
t____________________________________I
WIDE
(continued)
Operations ^ 3'^^