Sony KL-W7000 - Manual (Page 12)

Operations
Projecting the
picture
2
Turn on the power of the connected
equipment.
3
Press RGB or VIDEO to select the input you
want to watch.
The selected input indication is displayed on the
screen.
Power switch
(green)
V O L
©
0
1
If the STANDBY indicator on the front of the
monitor is lit in orange, press POWER on the
remote control to turn on the power.
LAMP STANDBY I------------------------ (!)
□ ■ □
POWER
Press the power switch (green) on the monitor if the
STANDBY indicator is not lit.
]
The green (!) (power) indicator flashes, then lights
up.
To watch a computer picture input from the
RGB IN connector
Each time you press RGB, the display changes as
follows;
RGB 1 RGB 2
To watch a video picture input from the
VIDEO IN jacks
Each time your press VIDEO, the display changes
as follows:
VIDEO 1 t___ • VIDEO 2 VIDEO 3
You can also select the input by pressing INPUT
SELECT on the monitor.
Each time you press INPUT SELECT, the display
changes as follows:
RGB 1 —► RGB 2 -► VIDEO 1 -► VIDEO 2 -► VIDEO 3 t_________________________ I
INPUT SELECT
fT
The input signal indication will automatically
disappear.
4
Press VOL +/- (VOLUME +/-) to adjust the
volume.
Remote control
VOL
Monitor
VOLUME
B
^
2"EN Operations