Notes, Speaker system hookups, What cords will i need – Sony STR-DA80ES User Manual
Page 7: Hookups
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
You can display the operating status of the
component connected to the S*UNK CTRL A1 jack
(USA and Canadian models only)
1
Press SET UP repeatedly to select OTHER SETUP.
2 Use the digital processing control buttons (e / e ) to
select CONTROL-Al.
3
Use the digital processing control buttons (/ ♦ ) to
select the setting you want by referring'to the
following table.
To
Seiect
Display "PLAY," "STOP," "PAUSE,"
or "REC" for about 8 seconds when
AUTO
the operation switches
Display "PLAY," "STOP," "PAUSE,"
"REC" or the contents of a disc or
track memo of a G3 or MD whenever
you press the DISPLAY button
FIX
Turn off the operation status display
OFF
Notes
• This setting is effective only when the receiver is set
to TAPE, DAT/MD, VIDEO 2, or CD (see page 13).
For VIDEO 2, the CD changer command mode must
be "CD 2" and the CD changer must be connected to
the VIDEO 2 jacks on the receiver. For CD, the CD
changer command mode must be "CD 1" and the CD
changer must be connected to the CD jacks on the
receiver.
• If the disc or track memo contains a character that the
receiver cannot display, appears for that character.
• When the Mega Control function of the CD player is
active, the operating status of the main player is
displayed.
Getting Started
Speaker System Hookups
Overview
This section describes how to connect your speakers to
the receiver. Although front (left and right) speakers
are required, center and rear speakers are optional.
Adding center and rear speakers will enhance the
surround effects. Connecting an active woofer will
increase bass response.
IMPEDANCE SELECTOR
FRONT SPEAKERS A
PRE OUT
CENTER REAR
SPEAKER SPEAKERS
What cords will I need?
Speaker cord (not supplied) (1 for each speaker)
(+)
(-)
(+)
(-)
Twist the stripped ends of the cord about 2/3 inch (15 mm).
Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and - to -. If the cords
are reversed, the sound will be distorted and will lack bass.
Hookups
Front speakers
Front speaker
Receiver
'Front speaker