Sony STR-DA80ES - Manual (Page 19)

Receiver Operations
Recording on a video tape
You can record from a VCR, a TV, or an LD player
using the receiver. You Cim also add audio from a
variety of audio sources when editing a video tape. See
your VCR or LD player's instruction manual if you
need help.
1
Select the program source to be recorded.
2 Set the component to be ready for playing.
For example, iirsert the laser disc you want to
record from into the LD player.
3 Insert a blank video tape into the VCR (VIDEO 1
or VIDEO 2) for recording.
4 Start recording on the recording VCR and then
start playing the video tape or laser disc you want
to record.
'Q* You can record sound from a different audio source
onto a video tape while copying from a video tape
or laser disc
Locate the point where you want to start recording from
another audio source, select the program source, then
start playback. The audio from that source will be
recorded onto the audio track of the video tape iirstead
of the audio from the original.
To resume audio recording from the original, select the
video source again.
Note
The signal input from a digital jack is trot output to the
analog output jacks. To do arulog recording, be sure to
connect dw component to the arulog input jacks.
Using the Sleep Timer [X]
You can set the receiver to turn off automatically at a
time you specify.
SLEEP ' o-?So
lir® ®
® ® ®S
® ® ®‘
ececifi
fi
asssm
SQ
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown
below.
> 2:00:00 -► 1:30:00-* 1K»KX) -► 0:30:00 -► OFF ■
c:
The display dims after you specify the time.
*■*
'Q * You can freely specify the time
Press SLEEP first then specify the time you want using
the digital processing control buttons ( A or V )• The
sleep time changes in 1 minute intervals. You can
specify up to 5 hours.
You can check the time remaining before the
receiver turns off
Press SLEEP. The remaining time appears in the
display.
19
r