Sony STR-DA80ES - Manual (Page 15)

Receiver Operations
If the component does not turn on
Press the power switch on the component.
2 Start playing.
See "Remote Button Descriptions" on page 36 for
details.
To turn off the components
Press SYSTEM OFF. This will also turn off the video/
audio componentfs) connected to AC OUTLET on the
back of this unit at the same time.
y if you use a Sony TV
When you press TV to watch a TV program, the TV
turns on and switches to the TV input. The TV also
turns on automatically and switdtes to the appropriate
video input when you press VIDEO 1 or VIDEO 2. If the
TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
Xf* Watching TV without the receiver (for Sony TVs only)
Press TV CONTROL ON to set the remote to operate TV
functions only. When you press diis button, the TV
turns on and switches to the TV input. If the TV does
not automatically switch to die TV input, press TV/
VIDEO.
Making components selectable/
unselectable
You can do these settings so that certain components
become unselectable even if you rotate FUNCTION.
1 Press SET UP repeatedly to select FUNCTION
HOOKUP.
'2 Use the digital processing control buttons (6 / ^)
to select a component.
3 Use the digital processing control buttons { * /
♦) to select CONNECT (selectable) or NO
(unselectable).
Notes
• When the receiver accepts the signal from the S-LINK
CTRL A1 jack to select that component which is set to NO
on the receiver, the setting changes to YES automatically
and the component is selected (USA and Canadian models
only).
• If you try to select the component which is set to NO using
the remote, "NO CONNECTION" appears in the display.
Receiving Broadcasts
This receiver lets you enter a station's frequency
directly by using the numeric buttons (direct timing). If
you don't know the frequency of the station you want,
see "Receiving broadcasts by scaiming stations
(automatic tuning)"on page 16.
Before you begin, make sure you have;
• Cormected an FM/AM anterma to the receiver as
indicated on page 5.
• Selected the appropriate speaker system. (For details,
see "Selecting the speeiker system" on page 9.)
FM/AM TUNING +/- FUNCTION
1 Press POWER to turn on the receiver.
2
Press TUNER on the remote.
The last received station is tuned in.
3
Press FM / AM to select FM or AM stations.
4 Press D.TUNING on the remote.
5 Press the numeric buttons on the remote to enter
the frequency.
Example 1: FM 102.50 MHz
Example 2: AM 1350kHz
(You don't have to enter the last "0." (USA and
Canadian models only))
©♦(D*(D
6
when you tune in AM stations, adjust the
direction of the AM loop anteima for optimum
reception.
To receive other stations
Repeat Steps 3 to 5.
(Continued)
15
W