Note, Step 2: setting the time, Step 2; setting the time – Sony LBT-S3000 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Inserting two size AAA (R03)
batteries into the remote
step 1: Hooking up the system
(continued)
Tips
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY/DEMO while the system is off.
Note
If you do not use the reniote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 2: Setting the
time
You must set the time before using the timer
functions. The clock is on a 24-hour system
for the European and Brazilian models, and a
12-hour system for other models.
The 24-hour system model is used for
illusfration purposes.
3,5 2,4
aa.
= j f f '
"1
1
Press ©/CLOCK SET.
The hour indication flashes.
u
^ / / - ¿ /
I I
Press TUNING +/- to set the hour.
V / iJ-V
I I I
^ w ^
3
Press ENTER/NEXT.
The minutes indication flashes.
/ L-4 I / / /V
I
JvL/
Lu
^ ^ ^
4
Press TUNING +/- to set the
minutes.
— V <
I
L
I’^ l I
/ fc.
> ^ A
5
Press ENTER/NEXT.
The clock starts.