Sony LBT-S3000 - Manual (Page 10)

Playing a CD (continued)
To Do this
Stop playback Press ■ .
Pause Press Oil (or II on the remote).
Press OH again to resume
playback (i>r CD ► on the
remote).
Select a track During playback or pause, turn
the jog dial clockwise (to go
forward) or counterclockwise (to
go backward) and release it when
you reach the desired track.
Or press AMS”^ ► W (to go
foru’ard) or AMS (to go
backward) on the remote.
Find a point
in a track Press and hold ► ► or during
playback, and release at the
desired point.
Select a CD Press one of the DISC 1 - DISC 5
buttons (or DISC SKIP).
Play only the
CD you haye
selected
Press PLAY MODE repeatedly
until "1 DISC" appears.
Play all CDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove or
change the
CDs
Press PUSH OPEN.
Adjust the
volume Turn VOLUME (or press
VOL +/- on the remote).
* AMS: Automatic Music Sensor
Tips
* Pressing C>ll while the system power is off
automatically turns on the system and starts CD
playback if there is a CD on the tray (One Touch
Play).
* You can switch from another source and begin
playing a CD just by pressii^ one of the
DISC 1 - DISC 5 buttons, or CD ► on the remote
(Automatic Source Selection).
* If there is no CD in the player, "NQ DISC"
appears in the display.
* You can change the CDs which are in the loading
position during playback.
Recording a CD
— CD Synchro Recording
Tliis function lots you easily record from a
CD to a tape. You can use TYPE 1 (normal)
tapes. The recording le\’el is automaticallv
adjusted.
l/(!) (Power)
7 1
<1
1
Press PUSH ^ and insert a blank
tape into deck B.
With the side you want to
record on facing forward
2
Press PUSH OPEN and place a CD.
10
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.