Connecting an md deck for analog recording, Connecting a vcr – Sony LBT-S3000 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connecting an MD deck
for analog recording

Be sure to match the color of the plugs and
the connectors. To listen to the sound of fhe
connected MD deck, press FUNCTION
repeatedly until "MD" appears. Refer to the
instructions included with your MD deck for
details.

Connecting a VCR

Be sure to match the color of fhe plugs and
the connectors. To listen to the sound from
the connected VCR, press FUNCTION
repeatedly until "VIDEO" appears.
Refer to the instructions included with your
VCR for defails.

To the audio inputs
of the MD deck

To the audio outputs
of the MD deck

To the audio

input of the VCR

To the audio

output of the VCR

Note

If you cannot select "MD" by pressing FUNCTION,
press 1/(1) while pressing FUNCTION when the
system is turned off. "VIDEO" will be switched to
"MD". To return to "VIDEO", do the same
procedure.