Sony LBT-S3000 - Manual (Page 19)

1 Place CDs and close the front cover.
2
Press FUNCTION repeatedly until
"CD" appears in the display.
3
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
4
Press DISC SKIP to select a CD.
5
Turn the jog dial until the desired
track appears in the display.
Disc number
Track number Total playing time
= _ = _*T
6
Press PLAY MODE once.
The track is programmed. First "STEP"
and the programmed playing order
appear, then the total playing time
appears.
The last programmed track Total playing time
---- . T. ,---------------------------------------
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM," "ALL DISCS SHUFFLE," or
"1 DISC SHUFFLE" disappears from the
display.
To
Check the program
Press
CHECK on the remote
repeatedly. After the
last track, "CHECK
END" appears.
Clear the last selected
track CLEAR on the remote
in stop mode.
Clear a specific track CHECK on the remote
repeatedly until the
number of the track to
be cleared lights up,
then press CLEAR.
Add a track to the 1 Press DISC SKIP to
program select a CD.
2 Turn the jog dial to
select a track.
3 Press PLAY MODE.
Clear the entire ■ once in stop mode or
program twice while playing.
Tips
• The program you created remains in the CD
player's memory ev^en after it has been played.
Press Oil to play the same program again.
• If appears instead of the total playing time
while programming, this means;
- you have programmed a track numbered over
20, or
- the total playing time has exceeded 100 minutes.
7
Repeat steps 4 through 6 to program
additional tracks.
Skip step 4 to select tracks from the same
disc.
8
Press on.
All the tracks play in the order you
selected.
19