To stop recording, To check the order, To cancel program edit – Sony LBT-S3000 User Manual
Page 22: Note, Selecting the tape length automatically
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording CDs by specifying the
track order (continued)
9
Press CD SYNC.
Deck B stands by for recording, the CD
player stands by for playback, and the
indicator on the t> button (for the front
side) lights up green.
10
Press DIRECTION repeatedly until
appears to record on one side or
(or RELAY) to record on both
sides.
11 Press
I I .
Recording starts.
To stop recording
Press ■ on deck B or on the CD player.
To check the order
Press CHECK on the remote repeatedly. After
the last track, "CHECK END" appears.
To cancel Program Edit
Press PLAY MODE repeatedly until
"PROGRAM," "ALL DISCS SHUFFLE," or
"1 DISC SHUFFLE"disappears from the
display.
Selecting the tape length
automatically
—
Tape Select Edit
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing more
than 20 tracks.
1
Press PUSH OPEN and place a CD
on the disc tray.
If the disc number you want to record
doesn't appear, press DISC SKIP
repeatedly so that it appears.
2
Press FUNCTION repeatedly until
"CD" appears in the display.
3
Press EDIT once, so that "EDIT"
flashes.
The required tape length for the
currently selected CD appears, followed
by the total playing time for side A and
side B respectively.
Note
You cannot use this function after programming.
In order to use this function, you must first cancel
the program.by pressing PLAY MODE repeatedly
until "PROGRAM", "ALL DISCS SHUFFLE" or
"1 DISC SHUFFLE" disappears from the display.
22