Z press channel, 4 press 5peed dialfprogram, Setting the digital security code – Sony SPP-AQ25 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other information
Setting the digital security code
You normally do not need to change the digital secutity
code. However, in the unlikely event that another cordless
phone uses the same digital security code, you can
manually change the code.
SAVE/RING ON switch is set
to RING ON.
Z
Press CHANNEL.
You will hear a confirmation beep.
3
Press the number between 0-65535 by using
the dialing keys.
4
Press 5PEED DIALfPROGRAM.
You will hear a long confirmation beep.
I
■
A prolonged power failure will
erase the digital security code.
To reprogram, place the
handset on the base unit.
I
Five short error beeps give
warning if you press any
number other than 0-65535
(such as 65536).
5
Immediately place the handset onto the base
unit to complete the code change.
This procedure will change the code in both the base unit
and the handset.
36
Handling the phone