Sony SPP-AQ25 - Manual (Page 11)

1 Antenna
2 Speaker
3 FLASH button
Switches to a second call if you have
"call waiting" service, or lets you
make a new call.
4 REMOTE button and lamp
Allows vou to operate the answering
machine from the handset. The lamp
lights while the remote operation
mode is activated.
5 Dialing keys/Remote operation
buttons
6 CONV REC (conversation
recording) button
Records phone conversations.
7 REDIAL/PAUSE button
Redials the last number called.
Also inserts a pause in the dialing
sequence.
8 Microphone
9 Ringer speaker
10 Charging terminals
11 Battery compartment
12 ВАТТ (battery) SAVE/RING ON
switch
Set to RING ON to turn the ringer on.
Set to ВАТТ SAVE to turn the ringer
off and conserve battery power.
13 CHANNEL button
Allows you to change channels if
interference occurs.
14 SPEED DIAUPROGRAM button
Stores phone number in the speed
dialing memory.
15 TALK button
Lets you make or receive a call.
16 TALK/BATT (battery) LOW lamp
Lights to indicate that the handset is
ready for dialing or is engaged in
con\’ersation. Also indicates level of
ba tter\- power.
When TALK is pressed, the lamp;
• liglits fc)r a few seconds when there is
sufficient battery left.
• flashes when the battery is low.
• does not light nor flash when the
battery is completelv discharged.
Setting up 11