Sony SLV-420 - Manual (Page 36)

Recording TV
programs using VCR
PÌUS+
POWER
TIMER
CLEAR
VCRPIUS4-
ONCE
WEEKLY
DAILY
TAPE
SPEED
Number
buttons
This section shows you another way of timer recording: recording using
VCR Plus+. This allows you to record TV programs more easily. Just
enter the program's ^TlusCode", and the VCR will automatically record
the program. You can preset up to eight programs within a one month
time frame.
Before you start...
• Check that the dock is set correctly.
• Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.
• Turn on your TV and tune in to the VCR.
When using a cable box, turn it on.
Notes
• You cannot set VCR Plus+in
the following cases:
- When the VCR is tiumed
off.
- While recording using the
timer or quick timer.
• The tuner will not accept
settings in the following
cases:
- When you select DAILY
for a Saturday and Sunday
program.
- When you select DAILY or
WEEKLY for a program
more than seven days
ahead.
- When you enter the
PiusCode of a program
that has already ended.
Press VCR Plus-p.
If the dock needs to be set, 'TLEASE SET
THE CLCXZK" appears on the screen and
the VCR automatically enters the dock
setting mode.
Enter the desired program's
PiusCode using the number
buttons.
If you make a mistake, press TIMER
CLEAR and enter the PiusCode again.
Select the tape speed, SP or EP, by
pressing TAPE SPEED.
4
Press ONCE, DAILY or WEEKLY
according to the following:
vcn P m .
PLUSCOOC T«>c
socco
t............. 1 (SPI
ENTER РП0С1ШГЗ PCUSOOOC
VSINC 0-9 KEYS
TO OiANCE TAPC SPEED.
PUSH TAPE SPECO
VCR PM.
PLUSCOOC TAPE SPEED
«3!.........1 [SPl
APTCR ENTCPNG PLUSCOOC.
PUSH 0NCCDAA.Y.
OB WEIW.Y
IF YOU UAKC A hUSTAKE,
PUSH CLEAR
vCR P m *
PLUSCOOC ТАРЕ SPEED
(«ZST-.-l tSPI
AFTER EHTERWO РШЭОООС,
PUSH ONCCDAJLY,
ОЙ WEEKLY
IF YOU UAKC A MISTAKE,
PUSH CLEAR
To record the program Press
Only once ONCE
Monday to Friday at the same scheduled time DAILY
Every week at the same scheduled time WEEKLY
The recording information appears on the
TV screen: date, program start and stop
times, chaimel number and tape speed.
Check that the information is correct.
To preset another timer setting, repeat
VCR P m .
PLUSCOOC TAPE SPCCO
tA»ST---] tSPi
RCCOFSwa TIME
DATE START STOP CH
UnO№ SOOPU IDOOPH 3> SP
TO Srr TIMER PUSH POWER
TO CANCO-PuSH C lear
steps 1 to 4.