Sony SLV-420 - Manual (Page 28)

Basic Operations
Playing atape
n
CID i
L — -T___ r'
• For further infonnalion on
searching and playback
functions, see 'Tlaying/
searching at various speeds"
on page
40.
Note
• Tapes recorded in LP mode
can be played back on this
VCR, while playback in
modes other than normal
forward speed is not
guaranteed.
REJECT
II PAUSE
O-PLAY
■ STOP
DUAL MODE
SHUTTLE
ring
This section shows you how to play back a video tape.
1
Turn on your TV and tune in to the
VCR:
• If the TV is connected to the VCR using
the audio/video cable, set the TV to
video input
• If the TV is connected to the VCR using
only the antenna cable, set the TV to
the channel for the VCR.
2
Insert a tape.
The VCR turns on automatically. The tape
starts playing automabcaJly if its safety
tab has been removed.
3
Press PLAY to start pla^ng.
When the tape reaches the end, the VCR
automatically rewinds it to the beginning.
(The power remains on.)
Additional tasks
To Press
Slop play ■ STOP
Pause play It PAUSE
Resume play after pause IIPAUSEorP=-PLAY
Search-forward Turn the DUAL MODE SHUTTLE CDMS) ring
to S during playback
Search backward Turn the DMS ring to 9 during playback
Fast-forward the tape Turn the DMS ring to ►► during stop
Revrind the tape Turn the DMS ring to during stop
Eject the tape REJECT
28 I Basic Operations