Samsung HT-HDP40 - Manual (Page 33)

Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or
manual tuning operation.
Presetting Stations
You can store up to:
« 15 FM stations
♦ 15 AM stations
•FM ••
•AM- • Frequency Modulation
• Medium Wave
I Remote Control Unit
' i l ;
■ button. Y :
The selection toggles back and
forth between "FM AM" each
time the
FM button is pressed.
Main Unit
1
Press the Function
button to select the
desired band (FM.
AM). -:; ;;;
2
Tune in to the
desired station.
2
Select a broadcast
station.: A : / ■
( Press the STOP |
button to select
PRESET and then press M-
button to select the preset station.
¡Press the STOP (■) button
Ito select "MANUAL" and
men press and hold >>H button to
automatically search the band.
( Press STOP (■) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
j When »1 is pressed, a
‘ preset broadcast station is
selected.
Press and hold TUNINGICH to
automatically search for active
broadcasting stations.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
0 Y.T..:u:"
vw,,v. -.w.;...
ÁV,:.:
TUNER
CD
fv!,::
'■■ a C:
T . . . . ;
ce
Í ; i
..; y......../: ■ - ;
y.:.;ú:TF
...
T : .•'" A .
-Ai T-Tw :T'A
Example: Presetting FM 89.1 in the memory
1
Press the TUNER
button and select the
FM band. : ^ -
• Each time the button is pressed,
the band switches between
"FM “+AM".
4
Press
to select preset
number. :
• You can select between 1 and
15.
2
Press TUNING/CH
to select "89.10". :
Refer to Step 2 on page 63 to
automatically or manually tune in
to a station.
5 Press the TUNER
MEMORY I
a:gain.
• Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
• TRGM’ disappears from the display and
the station is stored in memory.
3
Press the TUNER
MEMORY button.
“PRGM" flashes in the display.
6 To; preset another
station,: repeat
steps 2 to 5.
o
o
o
Press MO/ST button to listen in Mono/Stereo.
-^his applies only when listening to an FM station.) .
• Each time the button is pressed, the sound switches between "STEREO" and "MONO"
• In a poor reception area, select MONO for a clear, Interference-free broadcast.
To tune in to a preset station, press
remote control to select a channel.
■I on the