Samsung HT-HDP40 - Manual (Page 12)

How to Connect to Anynet
Using a Samsung Anynet-enabled TV, you can control the DVD Home Theater System and any other
Samsung Anynet-enabled AV device. For detailed operation instructions and connection diagram, refer
to the user's manual of your Samsung Anynet-enabled TV.
What is Anynet?
• The Anynet function allows you to use your Samsung TV's remote control and menu to control all AV devices.
• However, this function is available only with Samsung Anynet-enabled models.
^ Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal.
2 Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
3
Refer to the user's manual of your Anynet-enabled TV and activate the Anynet function.
* This function is available only with Samsung Anynet-enabled TVs.
Caution If the Anynet input and output terminals are reversed, communication with the TV will fail and
you will not be able to use the Anynet function.
Connecting the FM and AM Antennas S
o
o
o
o
cn
FM antenna connection I AM antenna connection
1. Connect the FM antenna supplied to the FM
75i2 COAXIAL terminal.
1. Connect the AM loop antenna supplied
to the AM and
rh
terminals.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
_ • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
~ newspaper or cloth, heat may build up inside the unit and fire may result.)